Spot Welding Machines

Product Details:

Single Sided Spot Welding Machine is designed for jobs that can't be accommodated in a conventional type spot welding machines due to throat depth limitations or bigger size of jobs such as stiffener welding on steel, Almira door, Almira shelves, passenger lift doors, flooring of passenger lift etc. Fitting of shelves in a steel Almira, welding on square or round pipes. Welding of the sheet on hollow structures cladding of S.S. sheet or structures.

CHS poke welding guns can also be used for tack welding applications on thicker materials, where a class ‘A’ weld is not required.

Compensation circuit starts the timer only when there is proper passage of current, which enables to perform on oxidized sheets, on surfaces with paint residue or on black sheets.

Product Details:

Portable Spot Welders are also available in a Gun-type fixture as Suspension welder which is suspended by a spring balance and hooked wire-rope. It is moveable over the job where the job is too heavy to handle it on the welder. The large Spot-Guns with reasonably long throat depth carry water-cooled kick-less cables to transfer the secondary currents to the gunfrom a grounded weld-transformer.

Some varieties of equipment with small guns are available with integral transformer. In this case the gun and transformer form one assembly and the assembly is suspended. Guns can be of various designs as per the job-configuration. Normally these Spot-Welders are pneumatically operated and connected to a fabricated boom or structure via spring balancer. Customer should provide full job details and production rate envisaged to get the offer.

Product Details:

There are production processes where, due to the design or construction, the joints that need to be welded can only be processed from one side of the material. For the simple reason that there is not enough space to place the counter-electrode on the rear. With our versatile welding guns for single-sided resistance spot welding, you can easily and reliably solve this special welding challenge.

The transformer, controller and finely adjustable welding cylinder create a gentle force that reliably creates connections and goes easy on materials.

Additional Information:

• Delivery Time: 2 Days

Product Details:

Battery Spot Welding Hand Held Welding Machine with dual modes intelligent frequency conversion pulse spot welder. Cruxweld CLB5H spot welders are the perfect battery tab spot welding systems for battery pack rebuilding, assembly, and manufacturing.

The CLB5H dual head battery tab spot welding machine provides strong, clean, repetitive welds.

Product Details:

Cruxweld Hand Held Dual Pulse Capacitive Discharge Spot Welder is the most popular hand held type battery spot welding machine. It is designed for the production of the world’s high-class battery manufacturer (NiMH. NiCd, Li-Ion/LiMnNi. LifePO4) withmore reliable and consistent welding than AC pulse.

Features:

• Dual Pulse operation removes surface inconsistencies and contaminants
• Adjustable pulse width, much more finesse than transformer based welders
• Simple, user-friendly interface, portable size
• Perfect for battery pack assembly
• Adjustable from 1% to 100% energy discharge
• Homogeneous welding spot, small spark, and no black spots
• Continuous/variable spot welding with high reliability and excellent performance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Delivery Time: 1 Week

Product Details:

Features:

• TRANSFORMER - No leakage (high linkage) design, proper cooling and insulation including winding impregnation to enhance reliability and service life
• CONSTRUCTION - Heavily fabricated with streamlined appearance, suitably stiffened at points of stress. The transformer is mounted directly on to the body and the bearings for the arm are provided in the same
• ADJUSTMENT OF ELECTRODE STROKE - By vertical adjustment of electrode
• CURRENT CONTROL - In hand operated by change of tap links
• WELD INITIATION - In hand operated machines by hand operated limit switch
• ELECTRONIC CONTROL - In hand operated machines solid state precision electronic timer provided

Applications : Spot welding, electro-brazing, cross wire welding, resistance heating and soldering. The machine is also
capable of welding stainless steel, brass, phosphor, bronze, alloy steel etc.

Product Details:

We offer an wide range (10 KVA-200 KVA) of Pneumatic Spot Welding Machine that are durable in nature and requires high strength.

Features:

• Control System - Machine consists of precision solid state C-MOS integrated weld timer with heavy duty electromagnetic contractor for switching purpose
• Time Control - Solid state electronic timer to control weld from 5 to 50 cycles and 1 to 10 seconds to achieve accurate and repeatable spots
• Pneumatic System - The basic pneumatic system consists of a pneumatic double acting cylinder, solenoid valve of 4 ways 5 port, filter, lubricator, regulator gauge and foot operated initiating switch for solenoid coil
• Electrode Force - Pressure on the work is obtained by means of heavy spring on the pressure rod at the back of the machine
• Electrode System - The electrode force is attained through the rocker arm mechanism coupled with the pneumatic cylinder
• Current Control - By means of 6 tap change links between 50% and 100%
• Cooling - Electrodes, holders and arms are provided with water cooling arrangement with hose connections

Product Details:

We are engaged in Manufacturing and Supplying of Table Mounted Spot Welding Machine that are manufactured using premium grade raw material.

Features:

• Electronic Control - Rugged solid state electronic timer, short range timing 5-50 cycles, long range timing 1-10 sec (50 to 500 cycles).
• Current Control - By means of 3 primary and 3 secondary taps on the transformer to provide welding current Adjustment in 9 steps, primary taps (high/low/medium) manipulated by a heavy duty snap action rotary switch.
• Weld Pressure - Provided by a sensitive spring carried on the welding head and regulated by a finely threaded large nut from 2 to 80 lbs.
• Weld Initiation -By means of a built-in switch which initiates the weld only after steady preset pressure is built up.
• Contactor - Rugged heavy duty contactor.
• Construction - Attractive designed welding head carrying the upper and lower electrode arms and spring control mechanism fitted on the table.

Applications:
The machine is highly versatile being capable of tackling delicate welds and on the other hand, possesses the adequate capacity to weld M.S. rods up to 12 SWG. It is possible to weld to a high degree of accuracy materials such as brass, stainless steel etc.

Product Details:

CRUXWELD Gun Type Spot Welding Machine is a resistance welding process in which the weld is obtained by pressing two pieces of metal together while an electric current is passed through them to heat the localized contacting surface to the welding temperature. Heat is generated by the resistance offered to the electric current through the parts being welded. The
pressure is applied to forge the heated zone as it is developed. Cruxweld Hand Spot welding machines are precision built and the high-grade quality material are employed to ensure efficient and economic performance as well as long trouble free service. These are designed to meet the needs of a vast number of metal fabrication shops. All internal parts are easily accessible. Specially designed proper cooling transformer having insulated and impregnated windings confirms to Indian and international standards applicable to this type of transformers.

Product Details:

Hand Operated Spot Welder

Features:

• Transformer - No leakage (high linkage) design, proper cooling and insulation including winding impregnation to enhance reliability and service life
• Construction - Heavily fabricated with streamlined appearance, suitably stiffened at points of stress. The transformer is mounted directly on to the body and the bearings for the arm are provided in the same
• Adjustment Of Electrode Stroke - By vertical adjustment of electrode
• Current Control - In hand operated by change of tap links
• Weld Initiation - In hand operated machines by hand operated limit switch
• Electronic Control - In hand operated machines solid state precision electronic timer provided

Applications : Spot welding, electro-brazing, cross wire welding, resistance heating and soldering. The machine is also
capable of welding stainless steel, brass, phosphor, bronze, alloy steel etc.

Product Details:

Cruxweld Pedal operated Rocker arm type Pedal Operated Spot Welder are offered in different range (5 KVA-35 KVA). All machines are made of steel fabricated rigid structures eliminate the minutest spot deflection.

Features:

• Transformer - no leakage (high linkage) design,proper cooling and insulation including winding impregnation to enhance reliability and service life.
• Time Control - solid state electronic timer to control weld from 5 to 50 cycles and 1 to 10 seconds to achieve accurate and repeatable spots.
• Cooling - electrodes, holders and arms are provided with water cooling arrangement with hose connections.
• Electrodes - One pair morse taper II straight electrodes supplied as standard with the machine.
• Electrode Force - pressure on the work is obtained by means of heavy spring on the pressure rod at the back of the machine.
• Adjustment Of The Electrode Stroke - by vertical adjustment of electrode holder.
• Current Control - by means of 6 tap change links between 50% and 100%.
• Weld Initiation - by means of mechanically operated switch which initiates the weld only after the pre-set pressure is built up.

Product Details:

We are one of the leading organization engaged in providing excellent quality Spot Welding Machine, which are manufactured by using high grade material. These Spot Welding Machine are widely appreciated by our clients which are situated all round the nation. We offer an wide range (10 KVA-200 KVA) of Spot Welding Machine that are durable in nature and requires high strength.

Features:

• Control System - Machine consists of precision solid state C-MOS integrated weld timer with heavy duty electromagnetic contractor for switching purpose
• Time Control - Solid state electronic timer to control weld from 5 to 50 cycles and 1 to 10 seconds to achieve accurate and repeatable spots
• Pneumatic System - The basic pneumatic system consists of a pneumatic double acting cylinder, solenoid valve of 4 ways 5 port, filter, lubricator, regulator gauge and foot operated initiating switch for solenoid coil
• Electrode Force - Pressure on the work is obtained by means of heavy spring on the pressure rod at the back of the machine
• Electrode System - The electrode force is attained through the rocker arm mechanism coupled with the pneumatic cylinder
• Current Control - By means of 6 tap change links between 50% and 100%
• Cooling - Electrodes, holders and arms are provided with water cooling arrangement with hose connections

Product Details:

We are engaged in Manufacturing and Supplying of Table Top Spot Welding Machine that are manufactured using premium grade raw material.

Features:

• ELECTRONIC CONTROL - Rugged solid state electronic timer, short range timing 5-50 cycles, long range timing 1-10 sec (50 to 500 cycles)
• CURRENT CONTROL - By means of 3 primary and 3 secondary taps on the transformer to provide welding current adjustment in 9 steps, primary taps (high/low/medium) manipulated by a heavy duty snap action rotary switch
• WELD PRESSURE - Provided by a sensitive spring carried on the welding head and regulated by a finely threaded large nut from 2 to 80 lbs
• WELD INITIATION -By means of a built-in switch which initiates the weld only after steady preset pressure is built up
• CONTACTOR - Rugged heavy duty contactor
• CONSTRUCTION - Attractive designed welding head carrying the upper and lower electrode arms and spring control mechanism fitted on the table

APPLICATIONS - The machine is highly versatile being capable of tackling delicate welds and on the other hand, possesses
the adequate capacity to weld M.S. rods upto 12 SWG. It is possible to weld to a high degree of accuracy materials such as
brass, stainless steel etc.

Product Details:

We are counted amongst the leading names in the industry, offering world-class range of Spot Welding Gun. We offer them in varied technical grades and are durable in nature. Our entire pitch out range has high tensile strength and is delivered as per the exact requirements of clients.

Features:

• TRANSFORMER - No leakage (high linkage) design, proper cooling and insulation including winding impregnation to enhance reliability and service life
• CONSTRUCTION - Heavily fabricated with streamlined appearance, suitably stiffened at points of stress. The transformer is mounted directly on to the body and the bearings for the arm are provided in the same
• ADJUSTMENT OF ELECTRODE STROKE - By vertical adjustment of electrode
• CURRENT CONTROL - In hand operated by change of tap links
• WELD INITIATION - In hand operated machines by hand operated limit switch
• ELECTRONIC CONTROL - In hand operated machines solid state precision electronic timer provided
• Applications : Spot welding, electro-brazing, cross wire welding, resistance heating and soldering. The machine is also
• Capable of welding stainless steel, brass, phosphor, bronze, alloy steel etc.

Product Details:

We have been indulged in manufacturing & supplying a wide-ranging consignment of Multi Spot Welding Machines. We give multi spot welding machines in various details for spot and projection welding applications. The machine is equipped with ten welding heads, five welding transformers, microprocessor based control, pneumatically actuated welding heads and job guides. These machines are substantial obligation steel created body that gives least weariness. We manufacture these machines utilizing most recent innovation and supplies. Our MSW machines are offered at reasonable prices ad they require least maintenance.

Operation: The operated loads the pre-tacked assembly on the welding machine and position the job for the first set of spots on flange. He then initiates the welding heads descend to weld and retract after welding,. The operated then indexes the job forward to align with the next set of spots to be made. This sequence is repeated till all the spots are made. The determines the welding heads, which are actuated in three groups.
The ten welding heads are divided into three groups. The middle six heads are in one group. The two outer heads (first from each end) are in one group and the immediate next heads are in group. A selector switch(s) determine which heads are actuated when the foot-switch is initiated. This permits selected group from being activated when the corresponding spots are not required

Product Details:

Cruxweld portable mini spot welder is a specially designed spot welding machine, suitable for single side spot welding on different thickness sheets of mild steel & stainless steel with the help of specially designed spot welding gun.

Features: 

• Energy efficient
• Portable
• Money saving-No pre/post welding processes
• Save time-Welds in seconds, High production
• High strength
• User Friendly-Easy to use

Product Details:

Cruxweld brand 5 KVA dual head precision table mounted Pneumatically Operated Battery Spot Welder for spot welding of lithium-ion battery. It is designed for the production of the world’s high-class battery manufacturer (NiMH. NiCd, Li-Ion/LiMnNi. LifePO4) with reliable performance.

• Nickel strip spot welder for 18650 cylinder battery packs welding
• Battery spot welding machine for battery cell nickel strip welding
• Foot switch and pressure adjuster, that improve the accuracy of welding
• There have one or two pulses to choose to faster welding

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Delivery Time: 1 Week

Product Details:

Single Sided Spot Series lightweight, water-cooled units are portable, easy to operate and provide a quick and effective means for spot welding mild, galvanized or stainless materials.

The machine is designed for jobs that can't be accommodated in a conventional type spot welding machines due to throat depth limitations or bigger size of jobs such as stiffener welding on steel, Almira door, Almira shelves, passenger lift doors, flooring of passenger lift etc. Fitting of shelves in a steel Almira, welding on square or round pipes. Welding of the sheet on hollow structures cladding of S.S. sheet or structures.

 

 

Additional Information:

• Delivery Time: 4 Days

Product Details:

• Easy to handle and with a conveniently placed switch it can be used for a wide variety of work.
• Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
• All transformer are coated with F class insulation material. Test are made using 4000 volts.
• A built-in differential pressure switch operates the timer when the electrode force is correct.
• Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar.

Product Details:

Multi Spot Welding Machine is an integrated gantry structure, and adopt three layer cylinders direct compression method that can increase the pressure of the unit area, ensuring the quality of welding. 

This steel wire mesh welding machine is especially designed for producing all kinds of mesh for constructional purpose in SRC applications with reinforcement function.

 

Features

• There are two sets of transformers, 12 cylinders in the machine. 
• Adjustable current for safer welding. 
• Machines are designed to separate the cylinders from the center of electrodes. 
• The welding current is adjustable.
• No matter wire mesh is in the top or bottom side can be welded.
• By using two set switches, even different size wire mesh can weld at same time.
• Easy to combine with other kinds of auto-process production equipments.
• Machine spot lower holder can move up & down for wire going through easily.
• Multi-point type design, spot weld one row each time.
• Energy-saving and stable welding power. 
• Improve the welding quality and enlarged the range of welding diameter.  

Additional Information:

• Delivery Time: 3 Weeks

Product Details:

Press Projection Welders are ideally suited for higher force requirements or larger parts.  They can also be equipped with t-slot platens, for rapid tool changes.MAIN FEATURES

• High performance DC welder of single-phase rectifier type
• Optimal for aluminum alloys, copper alloys, plated sheet steels welding
• Non-oil supply inflating guide with high performance adopted (Electrode stroke is of one-touch switching)
• A ball valve mounted at feet-water inlet
• Transparent hose available for stream confirmation
• Microcomputer timer mounted (welding time interlock equipment)

APPLICATIONS 

• Welding studs or weld nuts
• Welding stampings with multiple projections
• Welding Stainless Steel, Titanium, or other high-force applications
• High precision tooling is required
• T-slot platens are required
• Frequent tooling change-overs are necessary

Additional Information:

• Delivery Time: 2 weeks

Product Details:

Projection welding is a resistance welding process of joining two sheets or a sheet and a thick component, or a small component like a nut to a big body like automotive chassis, by making raised portions or projections on one of the components, where weld nugget is required to be made. Features

• 24″ Standard throat depth (can be ordered from 12” – 30”
• The lower knee design has about 6” of vertical adjustment, allowing the deepest of parts to fit within the throat of the machine
• Robust frame design
• Fully adjustable knee support allows greater rigidity for heavier gages of metal, but can be easily removed for welding tubes, tanks, pipes, HVAC ducts
• Fully rebuildable
• Precision air system
• Exclusive use of copper core, water cooled transformers
• All copper is a minimum 99.9% pure
• Designed and build in the India

Additional Information:

• Delivery Time: 4 weeks

Product Details:

Find durable single sided spot welders at great prices. Make quick, strong spot welds in a wide range of ferrous sheet metals including uncoated mild, galvanized, or stainless sheet steel. Spot welders are portable so they go wherever you need them. Pick up a spot weld gun for those hard to reach places. If you’re looking for great prices on welding tools and accessories, look no further than Cruxweld. 

Product Details:

This portable hand spot welding machine, air-cooled spot welder makes quick, strong spot welds without having to install a 240 volt outlet. Welds uncoated mild, galvanized or stainless sheet steel to 1/8 in. combined thickness (mild steel), two pieces of 20 gauge (galvanized).

Product Details:

We are one of the leading organization engaged in providing excellent quality Pneumatic Welding Machine, which are manufactured by using high grade material. These Pneumatic Welding Machine are widely appreciated by our clients which are situated all round the nation. We offer an wide range (10 KVA-200 KVA) of Pneumatic Welding Machine that are durable in nature and requires high strength.

Features:

• Control System - Machine consists of precision solid state C-MOS integrated weld timer with heavy duty electromagnetic contractor for switching purpose
• Time Control - Solid state electronic timer to control weld from 5 to 50 cycles and 1 to 10 seconds to achieve accurate and repeatable spots
• Pneumatic System - The basic pneumatic system consists of a pneumatic double acting cylinder, solenoid valve of 4 ways 5 port, filter, lubricator, regulator gauge and foot operated initiating switch for solenoid coil
• Electrode Force - Pressure on the work is obtained by means of heavy spring on the pressure rod at the back of the machine
• Electrode System - The electrode force is attained through the rocker arm mechanism coupled with the pneumatic cylinder
• Current Control - By means of 6 tap change links between 50% and 100%
• Cooling - Electrodes, holders and arms are provided with water cooling arrangement with hose connections

Additional Information:

• Delivery Time: 7 Days

Product Details:

We are counted amongst the leading names in the industry, offering world-class range of Projection Welding Machine. We offer them in varied technical grades and are durable in nature. Our entire pitch out range has high tensile strength and is delivered as per the exact requirements of clients. Our entire product range is abrasion resistant in nature.

Features:

• High performance
• Effectiveness
• Most reasonable prices

Product Details:

Fully water-cooled and pneumatic (“automatic”) portable spot gun with synchronous built-in electronic timer with SCR from 2 to 65 cycles. Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar. Max 2000 spots per hour (33 spots per minute, roughly need to wait 2 seconds between welds to dissipate heat).

Salient Features:

Balanced construction for easy operation.

A built-in differential pressure switch operates the timer when the electrode force is correct.

All transformers are coated with F class insulation material. Insulation test performed at 4000 V.

Additional arm couplings to provide a larger opening between arms.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Delivery Time: 7 Days

Product Details:

Our association has picked up name and popularity in giving Spot Welding SPM to our customers using latest manufacturing techniques.

Features:

• Multi axis movement of the spot welding guns / component
• Multi stud / Multi nut welding on the same machine
• Servo motor drive
• Capability to work and program variety of CNC and PLC controls
• Poke Yoke implemented for preventing errors
• Capability to integrate a high component variety in a single SPM
• Slide movement by ball screw or rack and pinion
• Design capability of special spot weld gun systems to reduce movement and cycle time
• User friendly concepts for ease on preventive maintenance and production

Product Details:

Cruxweld Spot Dent Puller Machine CDP40-220V, with it's 4000 A maximum output current, is the ideal product for dent pulling and straightening of low thickness car body elements (hood, door, roof panel). The product is multifunctional, which makes it a complete solution. Thanks to its low power consumption, it can work on a simple 230V power supply.

Advantages

• Remove dents without disassembling vehicle fittings
• Repair without replacing
• Reduce the downtime
• Light weight and easy to handle
• Clamping force at 8 bars: 550 daN
• High welding current
• Constant current control
• Independent power and time control
• A lever to do the job with less effort in less time
• 220v single phase makes it more smooth and versatile

Product Details:

Cruxweld have been manufacturing Battery Tab Spot Welders for the last 40 years. Our standard Lithium-Ion Battery Spot Welding Machine can weld tabs up to 0.5mm thickness and is compatible with a range of plating materials.

• Dual Welding Head
• Welders designed for superior battery tab welding
• Shorter lead time, especially on electrodes
• Support nickel plated tab thickness up to 0.5mm
• Small heat affected weld zones

Product Details:

Cruxweld Pedal operated Rocker arm type spot welding machines are offered in 15,20,30 KVA and Pneumatic operated spot-welding machines are offered in P15,P20,P30 KVA models each with three standard throat depths to cover practically all applications. All machines are made of steel fabricated rigid structures eliminate the minutest spot deflection. Pneumatic spot welders are designed for high speed production jobs meet vast need of metal fabrication industries including sheet metal components cross wire welding, kitchenware, electro brazing, resistance heating etc. Cruxweld's reputation for quality and innovation in spot welding equipment is second to none. We are able to supply any Cruxweld Spot welding equipment to suit your specific needs.

Features:

• Adjustable length of arms.
• Chrome/Copper electrode holders for long life, designed for both straight and angled fitting.
• Pneumatic operated, synchronous step less current control by thyristors and synchronous timers.
• Adjustable electrode stroke.
• Epoxy coated, water cooled transformer.
• Water cooled arms, electrode holders and electrodes.
• Synchronous SCR contactor insulated from water cooling circuit.
• Adjustable electrode pressure.
• Adjustable electrodes stroke.
• Water-cooled transformer, with epoxy resin coated windings.
• Foot control adjustable in length.

Product Details:

Table Mounted Spot Welder

Features:

• ELECTRONIC CONTROL - Rugged solid state electronic timer, short range timing 5-50 cycles, long range timing 1-10 sec (50 to 500 cycles)
• CURRENT CONTROL - By means of 3 primary and 3 secondary taps on the transformer to provide welding current adjustment in 9 steps, primary taps (high/low/medium) manipulated by a heavy duty snap action rotary switch
• WELD PRESSURE - Provided by a sensitive spring carried on the welding head and regulated by a finely threaded large nut from 2 to 80 lbs
• WELD INITIATION -By means of a built-in switch which initiates the weld only after steady preset pressure is built up
• CONTACTOR - Rugged heavy duty contactor
• CONSTRUCTION - Attractive designed welding head carrying the upper and lower electrode arms and spring control mechanism fitted on the table

Applications : The machine is highly versatile being capable to tackling delicate welds and on the other hand possesses adequate capacity to weld M.S. rods upto 12 SWG. It is possible to weld to a high degree of accuracy materials such as brass, stainless steel etc.

Product Details:

Portable Suspension Type Spot Welders are designed for extraordinary versatility and are available with different styles of welding guns. These air-operated guns are designed for high-speed production to meet the needs of a vast number of metal fabrication shops, particularly for the manufacture of automobile bodies and sub-assemblies.

Features

• Integrated Transformer Welding Gun (IT Gun)
• High Efficiency, Simple to Operate, Nimble and 360° Rotational Use, Energy Saving
• The smallest welder in the class of same output power
• High power transformer series in Strong Structure Design

Additional Information:

• Item Code: CHS25SG
• Delivery Time: 1 Week

Product Details:

Press Welder Features:

• Foot-operated rocker arm resistance spot welder (manual)
• Arms adjust 15″ to 29″
• Uses standard Morse #1 tapered tips
• Water-cooled transformer, arms and tip holders
• 220 or 440 volt 1PH electrics
• Dimensions: 40″L x 12″W x 50″H
• Weight: 300 lbs. (425 lbs. crated)
• 25 KVA Capacity: 2 pcs 14 gauge
• Custom lower arm design allows welding tubes as small as 2″ diameter and no hoses to interfere with parts

Product Details:

Our company is noted as one of the most creative manufacturers, suppliers and exporters of Intercell Welding Machine. Available with us in various technical specifications, these welding machines are engineered as per the national and international quality standards. Our offered Intercell Welding Machine is widely appreciated by the clients due to negotiable maintenance, easy installation and optimum performance.  

• Universal one size from 2.5 AH to 200 AH 
• Operating Range- 2.5lc to 9b
• Electricity Required- 25 to 30 HP instantaneous, 20 HP average.
• Machine Weight- approx. 500 kg., Size- 5’L X 4’ b X 7’h
• Air Required- @ 7kg/cm2 for jaw up-down operation.
• Servo control system for accuracy needed welding head movement 
• Use Miyachi Current Controller CY-210C
• Use weld detector MM-370B (Optional)
• Adjustable welding jaw strength with detection equipment 
• Temperature monitor on welding jaw and oil tank
• Independent hydraulic system for each jaw
• Proportional valve + electric ruler
• Cooling circulation path on welding jaw, transformer, and SCR with Chiller
• Machine working capacity- approx. 300 batteries per 8 hour shift

Product Details:

Cruxweld offers a complete line of standard and custom designed resistance welders, including automated multi-gun and special purpose spot welders. We also recondition or completely remanufacture and retool customer’s existing welders or select one from our large variety of used resistance and spot welders.

The stationary machine for resistance spot welding of general purpose is designed for resistance spot welding of products of low-carbon and corrosion-resistant steel, titanium and aluminum alloys, as well as cross-shaped joints of reinforcement bars of types BI, AI, AII,  AIII using alternating current with compressive force adjustable with one or more current pulses.

Product Details:

Our steel wire mesh welding machine/mesh welder is specially designed to produce welded mesh for constructional purpose as in RC and SRC applications with reinforcement concrete.  The machine can be tailor-made according to customer' s inquiry, but within the scope of our design for better efficiency and performance of the machines. Generally speaking we use two types of welding mechanisms: for smaller wire gauges; we use pneumatic welding system; for bigger wire gauges; we use hydraulic welding system.
For the machine to weld bigger wire gauges; the line wires need to be prestraightened and precut and insert manually to the Automatic Line Wire Carriage for automatic delivery to the welding system. The cross wires need to be straightened and cut to length and loaded in the Automatic Cross Wire Magazine/Feeder for automatic cross wire feeding to the welding system.  

Additional Information:

• Delivery Time: 30 days

Product Details:

Dual Head Spot Welders are a game changer for productivity. True dual-welds, for doubling workload or performing two different weld setups on the same part.Do you want to weld more than one weld at a time, but need the best possible quality and repeatability over the long term? A Dual Head spot welder is the only way to do it. Tools exist for welding more than one weld at a time, but they will always wear, you loose control over individual welds, and tool cost is high. These tools are intended for short runs. A Dual Head welder is the best long term solution.

The Dual Head is designed for applications that include:

• Welding two welds at once
• Using dual output nut feeders (or individual feeders), to weld two fasteners at a time
• Using large or complex tooling assemblies that require more than one weld

Additional Information:

• Delivery Time: 10 days

Product Details:

We supply whole plant of Fan Guard machine for star fan guard, spiral fan guard, and expanded fan guard.
Besides, we also supply customized Spot Welding Machines for many different products.  

Main Technical Data:

Servo motor power:2.6KW
Suitable wire diameter for middle ring:1.5-3mm
Rated welding power:50KW x 2
Size of guard:8’’-22’’
Productivity:2000-4000 pieces per 8 hours shift (16’’,120 pieces redial wires)
PLC control,TXT displaying
Air consumption:0.5M3/min
Welding current:10A per time
Dimension:1150 x 450x 1600mm

Additional Information:

• Delivery Time: 2 Weeks

Product Details:

We are engaged in offering Friction Welding Machine. These instruments are designed with precision.